How to fix Canon pixma Error 5b00 | abjorber full | service tools st4905

Canon Pixma iP2770/iP2772, g-series, mg2570s etc. error code 5B00 mean the waste ink counter reset (yellow and orange light, flashing alternately 7 times).

Error code 5b00. canon printer service tools.
How to fix Canon pixma printer Error code 5b00

Canon Service Tools ST4905. It will reset canon
#abjorber_full
#G1000,G2000,G3000, all G-series printer.
#MP237,MP287etc.
#ip2770,ip2772
#mg2570
#5b00
#error_code_5b00
#006
#p07

Solution for this problem is reset printer.
How to reset Canon Pixma iP2770/iP2772, G-Serise, mg2570s, etc error 5B00 or west ink absorber full, follow instruction bellow;
1. Turn off printer
2. Press and hold RESET button
3. Press and hold POWER button.
4. Released RESET button, POWER still pressed
5. Press and released RESET button 5 times
6. Released POWER button Now, printer on SERVICE MODE condition. In this condition, computer detect found new hardware.
7. When computer detect FOUND NEW HARDWARE, wait about 20 seconds and press CANCEL
8. Open software resetter Canon PRINTER
    download Re-setter ST4907
9. Set Destination - Region : select region - SET - OK
10. Load paper = 1 sheet
11. Clear Ink Counter - SET - OK Wait, the printer will print D=000.0
12. Ink Absorber Counter - SET - OK
13. Reset is done, now turn off printer.
14. Turn on printer and try to print Have problems when use software re-setter, read this Problems When Reset Canon Printer
15. When try to print, show up error message "The following ink may have run out", press and hold RESET button 7 seconds, then released them.
16. Finish
I hope this article useful. Thanks